ABB Case Studies Metal Fabrication

Edit This Case Study Record

	Metal Fabrication ABB

Metal Fabrication

ABB

Technology Category	Robots - Articulated Robots Robots - Robot Application & Programming Software
Applicable Industries	Equipment & Machinery
Applicable Functions	Process Manufacturing
Use Cases	Material Handling Automation
Challenge	As each mast section needs a total of 222 reliable welds, manufacturing them is an extremely labor intensive process. Until recently, STROS had to use highly skilled welders to make these sections. Although it has been using robots for 25 years, these machines could not manage the complex arc welds in narrow spaces needed for these particular components. Consequently, in order to produce a satisfactory number of mast sections it had to employ three welders per shift at three separate workstations to make these pieces. Apart from the obvious outlay this required in terms of manpower and space, STROS found it increasingly difficult to recruit the highly qualified welders needed for this work. That's why in 2007 the company decided to hold a tender for the complete robotization of its manufacturing process for mast sections. Of the four firms who participated, only the ABB group could fulfill all its requirements. Read More
About Customer	With 50 years in the business, STROS is one of the world’s leading suppliers of hoist machinery for building sites. It supplies high-quality work platforms as well as customized personnel and material hoists. Read More
Customer Name	STROS Read More
Solution	The process arm's fluid interaction with the positioner is an impressive feat of balletic synchronicity, which according to Škorpa could not have been achieved without ABB's readiness to work closely with STROS in designing the system. STROS uses a rotating IRBP 500 D positioner with two workstations to hold the individual parts of the mast section that are to be welded before the final piece is completed. This means that the robot is in constant use, because an operator can prepare pieces for welding on one side of the positioner while the other part is being welded. The positioner then rotates and welding continues while the operator removes the completed part on the other side and prepares the next component. The standard combined cycle time for making one mast section is 54 minutes, which is three times quicker than the time required by a human welder to make the same piece. Read More Log in to view content
Contents

Technology Category

Robots - Articulated Robots

Robots - Robot Application & Programming Software

Applicable Industries

Equipment & Machinery

Applicable Functions

Process Manufacturing

Use Cases

Material Handling Automation

Challenge

As each mast section needs a total of 222 reliable welds, manufacturing them is an extremely labor intensive process.

Until recently, STROS had to use highly skilled welders to make these sections. Although it has been using robots for 25 years, these machines could not manage the complex arc welds in narrow spaces needed for these particular components. Consequently, in order to produce a satisfactory number of mast sections it had to employ three welders per shift at three separate workstations to make these pieces. Apart from the obvious outlay this required in terms of manpower and space, STROS found it increasingly difficult to recruit the highly qualified welders needed for this work. That's why in 2007 the company decided to hold a tender for the complete robotization of its manufacturing process for mast sections. Of the four firms who participated, only the ABB group could fulfill all its requirements.

About Customer

With 50 years in the business, STROS is one of the world’s leading suppliers of hoist machinery for building sites. It supplies high-quality work platforms as well as customized personnel and material hoists.

Customer Name

STROS

Solution

The process arm's fluid interaction with the positioner is an impressive feat of balletic synchronicity, which according to Škorpa could not have been achieved without ABB's readiness to work closely with STROS in designing the system. STROS uses a rotating IRBP 500 D positioner with two workstations to hold the individual parts of the mast section that are to be welded before the final piece is completed. This means that the robot is in constant use, because an operator can prepare pieces for welding on one side of the positioner while the other part is being welded.

The positioner then rotates and welding continues while the operator removes the completed part on the other side and prepares the next component. The standard combined cycle time for making one mast section is 54 minutes, which is three times quicker than the time required by a human welder to make the same piece.

Benefit #1	One tailor-made robotized workstation produces the same number of pieces per eight-hour shift as three human welders would.
Benefit #2	Robot welding systems ensure consistent highquality welds without any of the deviations produced by human welders.

Benefit #1

One tailor-made robotized workstation produces the same number of pieces per eight-hour shift as three human welders would.

Benefit #2

Robot welding systems ensure consistent highquality welds without any of the deviations produced by human welders.

Download PDF Version

Overview

Metal Fabrication

Quantitative Benefit